The Curta.org Bulletin Board Forum Index The Curta.org Bulletin Board
Welcome to the Curta.org Information Exchange Forum for the Curta Enthusiast Community
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Cleaned my Curta with a ultrasonic cleaner...

 
Post new topic   Reply to topic    The Curta.org Bulletin Board Forum Index -> General Questions and Help
View previous topic :: View next topic  
Author Message
flashboiler



Joined: 08 Mar 2018
Posts: 8
Location: United States

PostPosted: Fri Feb 25, 2022 8:43 pm    Post subject: Cleaned my Curta with a ultrasonic cleaner... Reply with quote

Hi all,

I have a Curta II that would often input the wrong numbers...

I tried lubing with sewing machine oil and it helped but quickly returned to its error prone self.

I bought a cheap ultrasonic cleaner from Amazon and cleaned the unit using water and dish soap. A fair amount of gunk came out. Then I dried it using a hair dryer. I used Mobius oil to lube the sliders and points I could get to. (I only took the bottom two screws off when I cleaned the calculator so I really couldn't oil all the points that require further disassembly)

I couldn't be happier, the curta hasn't had an error yet after lots of calculations. It feels really smooth now.
Back to top
View user's profile Send private message
Sebastian



Joined: 11 May 2014
Posts: 41
Location: Germany

PostPosted: Sat Mar 26, 2022 8:03 pm    Post subject: Reply with quote

I would have expected this post on 04/01.
I would never think of cleaning a Curta in water and washing-up liquid - more like kerosene.
There are now many places in your Curta that no longer have a suitable lubricant. There are tiny springs and steel balls in the input slides in a bore that is certainly difficult to get the water out of. I always disassemble newly purchased Curtas down to the last part, clean the individual parts in an ultrasonic bath with petroleum and then lubricate them with the right lubricants according to the service manual when assembling them. In some cases parts have to be replaced or adjusted. Your approach is not the best for such a precision mechanical machine.
_________________
Type I
5023
8121
11140
22146
22961
22983
26713
66561
80151
Type II
500438
502852
507157
509135
555001
555476
Back to top
View user's profile Send private message
flashboiler



Joined: 08 Mar 2018
Posts: 8
Location: United States

PostPosted: Fri Apr 14, 2023 5:25 pm    Post subject: Reply with quote

UPDATE: More than a year later and my Curta still works perfectly after the cleaning.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    The Curta.org Bulletin Board Forum Index -> General Questions and Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group