The Curta.org Bulletin Board

[jro]

Hi everyone,

I have recently acquired a Type II on Ebay for a reasonable price and good condition, but the case was missing. It prompted me to CAD a replacement inspired by the original plastic canisters (I own other Curtas with cases which allowed me to study them) and optimized for FDM 3D printing.

The cases have the cushion on the bottom, the stem on the top to hold the Curta in position inside the case and an O-ring to seal the case. The O-ring is black as I have not found a white one (yet).

I am willing to print and send the cases for a reasonable price to anyone interested. Send me an email to janrod@gmail.com.

Photos of the Type II variant of the case housing my caseless #538312.

https://drive.google.com/file/d/11rxLkzue9l0Teg4qwtqv0EH2COBWraXz/view?usp=sharing
https://drive.google.com/file/d/1_4wsnxZXFJtHwcYUBHhjTHOH7nX1AmL8/view?usp=sharing
https://drive.google.com/file/d/1il-0vP1gU-GpG7x15Xl9nUllqk6ALVXM/view?usp=sharing
_________________
jro