View previous topic :: View next topic |
Author |
Message |
curtaschweiz
Joined: 10 Dec 2021 Posts: 8 Location: Switzerland
|
Posted: Mon Mar 28, 2022 4:26 pm Post subject: cleaning aid for number dials |
|
|
Today, I made 2 fixtures for the carriage castings including the number dials.
This number dials must not be exchanged because they are different! During the cleaning process in the ultrasonic cleaner, they stay in their original position.
![](http://abload.de/img/img_20220328_181142f9jpm.jpg) _________________ curta-schweiz.ch (Official Curta service center Switzerland - pre owned by Hilti, Liechtenstein) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
opensourcefan Guest
|
Posted: Fri Sep 08, 2023 4:45 pm Post subject: |
|
|
Very cool!
Have you found that debris collects at the bottom of the fixtures, would slots help with flushing debris?
In respect to ultrasonic cleaning; I suspect the dials may be the most sensitive to chemicals. What liquid do you use for cleaning? What has been proven harmful?
I was thinking water with some dish soap and or a touch of vinegar. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Sebastian
Joined: 11 May 2014 Posts: 41 Location: Germany
|
Posted: Sun Sep 10, 2023 7:24 am Post subject: |
|
|
@opensourcefan
For cleaning all parts of the Curta's I've serviced so far I use petroleum/kerosene in my ultrasonic cleaner - it gives my the best result.
Cheers
Sebastian _________________ Type I
5023
8121
11140
22146
22961
22983
26713
66561
80151
Type II
500438
502852
507157
509135
555001
555476 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bardamu
Joined: 10 May 2010 Posts: 13 Location: Bourges
|
Posted: Mon Sep 18, 2023 5:03 am Post subject: |
|
|
Hi everyone,
Since two years I don't use ultrasonic cleaner on any anodized part of a Curta.
Most of the time it works without problem but it may happen that the anodized part whitens (probably due to the fact of a too thin anodized layer). In such a case it's a disaster.
Now I use ultrasonic only on other parts.
For anodized parts now I do like this : the parts soaked for several hours in distilled water with neutral PH soap, then gently brushed by hand with a toothbrush.
Best regards,
Marc Pellacoeur. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bardamu
Joined: 10 May 2010 Posts: 13 Location: Bourges
|
Posted: Mon Sep 18, 2023 5:50 am Post subject: |
|
|
then obviously I rinse. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|