The Curta.org Bulletin Board Forum Index The Curta.org Bulletin Board
Welcome to the Curta.org Information Exchange Forum for the Curta Enthusiast Community
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Review - "The CURTA watch"

 
Post new topic   Reply to topic    The Curta.org Bulletin Board Forum Index -> General Questions and Help
View previous topic :: View next topic  
Author Message
murff



Joined: 27 Oct 2009
Posts: 553
Location: Switzerland

PostPosted: Tue May 24, 2022 8:35 am    Post subject: Review - "The CURTA watch" Reply with quote

Review - "The CURTA watch" of Mr. Mathias Schneider (curtaschweiz)

The Curta watch was published by Mr. Schneider on May 2022
... and is offered as a limited edition of 75 pieces (CHF 3750.00, about US$3850.00).

You will not believe it - purely by chance Mr. Schneider had exactly the same idea to create a Curta watch - unfortunately, the opposite cannot be proven. According to the legal assessment, the original rights are difficult to prove - with this exception:
Quote:
"...However, these features (the Curta design details) have been taken over by the calculating machine, so that such rights would probably lie with the legal successor of Contina AG or the heirs of Curt Herzstark."



(Source: Product presentation on various websites of Mr. Schneider, e.g. curtawatch_com)


So far so good - here is my review:
    General impression: this Curta watch appears rather cluttered - in proportions not necessarily corresponding to a Curta. Of course, you can recognize - as with my original design - design elements of the Curta. However, these have not always been consistently adopted/interpreted, but have a certain arbitrariness.

    The dial is surrounded by an unnecessarily wide ring - (1) an additional 12 division for the hours and (2) a ring for the two decimal markers. Thus, the typical view of the Curta (from above) is lost. Furthermore, (3) the inner white thin ring and (4) the white (quite chunky) border is untypical for a Curta based design.

    The numerals in the result (black) and counter dial (white) are unfortunate arranged and clash with the division of twelve. Also, (5) the division of the result and counter dial in the middle of a digit is a rather gross design error, the functional design of the Curta is completely ignored.

    The minute hand is shown as the clearing lever, but (6) in an incomprehensible red and with a gap or black mark(?) on the outer periphery (...it looks like a typical broken clearing lever). The hour hand was inspired (7) by the crank, but the white color is incongruous.

    In the center, the second hand rotates (8) with the Contina logo, but this reference to the Curta is not very authentic. In the center is the spherical segment of the crank on every Curta.

    And finally - the crown (9) does not look like a knurled Curta crank handle at all.

    I would have noted "Swiss Made" on the back of the watch - the Curta was produced in Liechtenstein, after all.

    "2022 - The 75th Anniversary of CURTA" - is probably more marketing than solid historical basis. 1947 was certainly an important year for Contina AG - the first factory prototypes were produced. And the name CURTA did not exist in 1947... The history of Curta began much earlier, as we know.

    At CHF 3750.00, this watch is rather overpriced.





PS... I dealt with my original design of THE CURTA WATCH for a very long time and very thoroughly - so I will take the liberty here to go into the design details of this variant.
Original idea published here:
curta.org | curta.li


The Curta Watch (c) 2018 - side view


The Curta Watch (c) 2018 - top view
_________________
:: m u r f f
:: curta.li
Back to top
View user's profile Send private message Visit poster's website
2010*smiths



Joined: 18 Apr 2013
Posts: 51
Location: Bogota, Colombia

PostPosted: Sun Jul 31, 2022 11:23 am    Post subject: Reply with quote

That looks like a right dog's dinner and is seriously overpriced.

I still regularly wear my 'Curta Amphibia' homage which I put together using readily available parts for about 100 way back in 2015. Not sure whether that makes my horological efforts the first but I do know that it looks a lot better than the Schneider effort.

https://forum.tz-uk.com/showthread.php?355407-The-Curta-Amphibia&p=3789061&viewfull=1#post3789061




The eagle-eyed will spot that I have fitted a more robust the crown since then, which is more in keeping with the design.

Back to top
View user's profile Send private message
2010*smiths



Joined: 18 Apr 2013
Posts: 51
Location: Bogota, Colombia

PostPosted: Sun Jul 31, 2022 11:35 am    Post subject: Reply with quote

The movement in the Schneider watch is a 28,800 bph Ronda R150, which is really nothing to write home about with an accuracy rating of +/- 12 seconds per day. It's an inexpensive movement in an expensive watch.

The only thing that I do like is the packaging.

Back to top
View user's profile Send private message
murff



Joined: 27 Oct 2009
Posts: 553
Location: Switzerland

PostPosted: Sun Jul 31, 2022 2:23 pm    Post subject: Reply with quote

2010*smiths wrote:
That looks like a right dog's dinner and is seriously overpriced.

... I like that expression!


(a nice idiom that does not exist in German...).

Cool
_________________
:: m u r f f
:: curta.li
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    The Curta.org Bulletin Board Forum Index -> General Questions and Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group