 |
The Curta.org Bulletin Board Welcome to the Curta.org Information Exchange Forum for the Curta Enthusiast Community |
| Type II decimal markers. | |
| Author | Message |
|---|---|
| Bardamu Joined: 10 May 2010 Posts: 16 |  Posted: Tue Mar 06, 2018 10:30 am Post subject: Type II decimal markers.Hi everyone, I am going to have in hands a type II in very good condition with low SN 501070 (so a black model). The machine seems have been used very few and is with no visible problem (only needs a cleaning). But it has only three decimal markers on the top rather than the normal six (and it has the normal five one on the bottom). My question is : is this configuration normal (a possible factory configuration) or has it been some problem on the machine on this point ? I never saw a type II machine with only three markers on the top but perhaps someone saw that (being sure it was original). Thanks everyone ! Marc Pellacoeur. |
| murff Joined: 27 Oct 2009 Posts: 620 | Posted: Tue Mar 06, 2018 5:47 pm Yes, six markers are the standard... There are many possible stories why there are only three on your Curta - maybe a custom configuration... but no problem at all  |
| All times are GMT |